How To Install A Dishwasher Without Involving A Plumber

In this era of modern technology, several appliances have proved to be very effective at home. One of them is the dishwasher. By getting this device, you will save time and conserve the amount of water you use to clean different dishes at home. That said, you might be wondering how one can install this device at home.

Although hiring plumbers from Sunshine Coast Plumbing Company and other services providers is okay, you can still undertake dishwasher installation by yourself. Here are the ways that can help you get started:

Choose a good location

As you purpose to install a dishwasher, you should first determine where you want to install it. Ideally, you should place it in a convenient place where you will have an easy time using it. For instance, one of those places where you can place it is on one side of the kitchen sink.

Such location has access to existing water and drain lines, making it an ideal location for your dishwasher. But, more importantly, you should ensure that the dishwasher will fit well in the location of your choice.

Make the connections

Since you have known where to place the dishwasher and you have all the dishwasher installation tools, time is ripe for you to make all the necessary connections. However, you need to first turn off the electricity and water in your kitchen. By doing this, you will remain safe from any form of electrical shocks during the installation process.

Following the instructions from the manufacturer, start by attaching the electrical cord. Like any other electrical appliances you find at home, the electrical cord is found behind the access panel, primarily located on the front bottom of the dishwasher. You can lay the dishwasher on its back to access this panel and make the necessary connections.

Connect the dishwasher to the water supply

Once you have attached the electrical cord, you should now hook up the water supply for this appliance. All you need to do is to locate the water inlet fitting on the solenoid valve and then apply a pipe joint compound to the threads you will see on the dishwasher.

Next, apply the same on the solenoid valve and then tighten it using your hand. You can even use a pair of pliers to fasten it as well.

Connect the water supply tube to the water supply line of your house

Since you have connected the water supply tube to your dishwasher, you can now go ahead and connect it to the water supply line of your home. Unlike the previous fitting, this one does not require a pipe joint compound.

All you need is to thread the coupling nut of the supply line on the dishwasher and then tighten it with a pair of pliers. As you tighten, be moderate not to strip the threads.

Put the dishwasher in the proper position

Once everything has been set up, put the dishwasher in an upright position. Ensure that all the cords are well connected. From the power cord to the drain hose, you should ensure that everything is in its rightful place.

Anchor the dishwasher

To keep the dishwasher stable, you should ensure that you anchor it in place. Then, using the screws that came with the dishwasher, you will be able to mount it in place and thereby make it more stable. After that, you can test the dishwasher and see if it is working optimally.

Wrapping Up

Although hiring plumbers from Sunshine Coast Plumbing Company is a good idea, you can do it yourself. By doing so, you will save more on cost and so forth. Consider the ideas mentioned above, and you will be able to install a dishwasher successfully.